mirror of
https://github.com/ipxe/ipxe
synced 2026-05-23 20:00:12 +03:00
be8ecaf805
EISA expansion slot I/O port addresses overlap space that may be assigned to PCI devices, which can lead to register reads and writes with unwanted side effects during EISA probing. Reduce the chances of performing EISA probing on PCI devices by probing EISA slot vendor and product ID registers only if the EISA system board vendor ID register indicates that the motherboard supports EISA. Debugged-by: Václav Ovsík <vaclav.ovsik@gmail.com> Tested-by: Václav Ovsík <vaclav.ovsik@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
191 lines
4.6 KiB
C
191 lines
4.6 KiB
C
#include <stdint.h>
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include <stdio.h>
|
|
#include <errno.h>
|
|
#include <ipxe/io.h>
|
|
#include <unistd.h>
|
|
#include <ipxe/eisa.h>
|
|
|
|
FILE_LICENCE ( GPL2_OR_LATER );
|
|
|
|
static void eisabus_remove ( struct root_device *rootdev );
|
|
|
|
/**
|
|
* Reset and enable/disable an EISA device
|
|
*
|
|
* @v eisa EISA device
|
|
* @v enabled 1=enable, 0=disable
|
|
*/
|
|
void eisa_device_enabled ( struct eisa_device *eisa, int enabled ) {
|
|
/* Set reset line high for 1000 µs. Spec says 500 µs, but
|
|
* this doesn't work for all cards, so we are conservative.
|
|
*/
|
|
outb ( EISA_CMD_RESET, eisa->ioaddr + EISA_GLOBAL_CONFIG );
|
|
udelay ( 1000 ); /* Must wait 800 */
|
|
|
|
/* Set reset low and write a 1 to ENABLE. Delay again, in
|
|
* case the card takes a while to wake up.
|
|
*/
|
|
outb ( enabled ? EISA_CMD_ENABLE : 0,
|
|
eisa->ioaddr + EISA_GLOBAL_CONFIG );
|
|
udelay ( 1000 ); /* Must wait 800 */
|
|
|
|
DBG ( "EISA %s device %02x\n", ( enabled ? "enabled" : "disabled" ),
|
|
eisa->slot );
|
|
}
|
|
|
|
/**
|
|
* Probe an EISA device
|
|
*
|
|
* @v eisa EISA device
|
|
* @ret rc Return status code
|
|
*
|
|
* Searches for a driver for the EISA device. If a driver is found,
|
|
* its probe() routine is called.
|
|
*/
|
|
static int eisa_probe ( struct eisa_device *eisa ) {
|
|
struct eisa_driver *driver;
|
|
struct eisa_device_id *id;
|
|
unsigned int i;
|
|
int rc;
|
|
|
|
DBG ( "Adding EISA device %02x (%04x:%04x (\"%s\") io %x)\n",
|
|
eisa->slot, eisa->vendor_id, eisa->prod_id,
|
|
isa_id_string ( eisa->vendor_id, eisa->prod_id ), eisa->ioaddr );
|
|
|
|
for_each_table_entry ( driver, EISA_DRIVERS ) {
|
|
for ( i = 0 ; i < driver->id_count ; i++ ) {
|
|
id = &driver->ids[i];
|
|
if ( id->vendor_id != eisa->vendor_id )
|
|
continue;
|
|
if ( ISA_PROD_ID ( id->prod_id ) !=
|
|
ISA_PROD_ID ( eisa->prod_id ) )
|
|
continue;
|
|
eisa->driver = driver;
|
|
eisa->dev.driver_name = id->name;
|
|
DBG ( "...using driver %s\n", eisa->dev.driver_name );
|
|
if ( ( rc = driver->probe ( eisa, id ) ) != 0 ) {
|
|
DBG ( "......probe failed\n" );
|
|
continue;
|
|
}
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
DBG ( "...no driver found\n" );
|
|
return -ENOTTY;
|
|
}
|
|
|
|
/**
|
|
* Remove an EISA device
|
|
*
|
|
* @v eisa EISA device
|
|
*/
|
|
static void eisa_remove ( struct eisa_device *eisa ) {
|
|
eisa->driver->remove ( eisa );
|
|
DBG ( "Removed EISA device %02x\n", eisa->slot );
|
|
}
|
|
|
|
/**
|
|
* Probe EISA root bus
|
|
*
|
|
* @v rootdev EISA bus root device
|
|
*
|
|
* Scans the EISA bus for devices and registers all devices it can
|
|
* find.
|
|
*/
|
|
static int eisabus_probe ( struct root_device *rootdev ) {
|
|
struct eisa_device *eisa = NULL;
|
|
unsigned int slot;
|
|
uint8_t system;
|
|
int rc;
|
|
|
|
/* Check for EISA system board */
|
|
system = inb ( EISA_VENDOR_ID );
|
|
if ( system & 0x80 ) {
|
|
DBG ( "No EISA system board (read %02x)\n", system );
|
|
return -ENODEV;
|
|
}
|
|
|
|
for ( slot = EISA_MIN_SLOT ; slot <= EISA_MAX_SLOT ; slot++ ) {
|
|
/* Allocate struct eisa_device */
|
|
if ( ! eisa )
|
|
eisa = malloc ( sizeof ( *eisa ) );
|
|
if ( ! eisa ) {
|
|
rc = -ENOMEM;
|
|
goto err;
|
|
}
|
|
memset ( eisa, 0, sizeof ( *eisa ) );
|
|
eisa->slot = slot;
|
|
eisa->ioaddr = EISA_SLOT_BASE ( eisa->slot );
|
|
|
|
/* Test for board present */
|
|
outb ( 0xff, eisa->ioaddr + EISA_VENDOR_ID );
|
|
eisa->vendor_id =
|
|
le16_to_cpu ( inw ( eisa->ioaddr + EISA_VENDOR_ID ) );
|
|
eisa->prod_id =
|
|
le16_to_cpu ( inw ( eisa->ioaddr + EISA_PROD_ID ) );
|
|
if ( eisa->vendor_id & 0x80 ) {
|
|
/* No board present */
|
|
continue;
|
|
}
|
|
|
|
/* Add to device hierarchy */
|
|
snprintf ( eisa->dev.name, sizeof ( eisa->dev.name ),
|
|
"EISA%02x", slot );
|
|
eisa->dev.desc.bus_type = BUS_TYPE_EISA;
|
|
eisa->dev.desc.vendor = eisa->vendor_id;
|
|
eisa->dev.desc.device = eisa->prod_id;
|
|
eisa->dev.parent = &rootdev->dev;
|
|
list_add ( &eisa->dev.siblings, &rootdev->dev.children );
|
|
INIT_LIST_HEAD ( &eisa->dev.children );
|
|
|
|
/* Look for a driver */
|
|
if ( eisa_probe ( eisa ) == 0 ) {
|
|
/* eisadev registered, we can drop our ref */
|
|
eisa = NULL;
|
|
} else {
|
|
/* Not registered; re-use struct */
|
|
list_del ( &eisa->dev.siblings );
|
|
}
|
|
}
|
|
|
|
free ( eisa );
|
|
return 0;
|
|
|
|
err:
|
|
free ( eisa );
|
|
eisabus_remove ( rootdev );
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* Remove EISA root bus
|
|
*
|
|
* @v rootdev EISA bus root device
|
|
*/
|
|
static void eisabus_remove ( struct root_device *rootdev ) {
|
|
struct eisa_device *eisa;
|
|
struct eisa_device *tmp;
|
|
|
|
list_for_each_entry_safe ( eisa, tmp, &rootdev->dev.children,
|
|
dev.siblings ) {
|
|
eisa_remove ( eisa );
|
|
list_del ( &eisa->dev.siblings );
|
|
free ( eisa );
|
|
}
|
|
}
|
|
|
|
/** EISA bus root device driver */
|
|
static struct root_driver eisa_root_driver = {
|
|
.probe = eisabus_probe,
|
|
.remove = eisabus_remove,
|
|
};
|
|
|
|
/** EISA bus root device */
|
|
struct root_device eisa_root_device __root_device = {
|
|
.dev = { .name = "EISA" },
|
|
.driver = &eisa_root_driver,
|
|
};
|