mirror of
https://github.com/ipxe/ipxe
synced 2025-12-26 17:42:47 +03:00
ae01462b79
Our current behaviour when booting as a ROM is to autoboot only from devices which are attached via the PCI bus:dev.fn address passed to the ROM's initialisation vector. Add a build configuration option AUTOBOOT_ROM_FILTER (enabled by default) to control this behaviour. This allows for ROMs to be built which will attempt to boot from any detected device, even if not attached via the original PCI bus:dev.fn address. (This is particularly useful when building combined EHCI/xHCI ROMs for USB network boot, since the BIOS may request a boot via the EHCI controller but the xHCI driver will reroute the root hub ports to the xHCI controller.) Signed-off-by: Michael Brown <mcb30@ipxe.org>
176 lines
5.3 KiB
C
176 lines
5.3 KiB
C
#ifndef CONFIG_GENERAL_H
|
|
#define CONFIG_GENERAL_H
|
|
|
|
/** @file
|
|
*
|
|
* General configuration
|
|
*
|
|
*/
|
|
|
|
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
|
|
|
|
#include <config/defaults.h>
|
|
|
|
/*
|
|
* Banner timeout configuration
|
|
*
|
|
* This controls the timeout for the "Press Ctrl-B for the iPXE
|
|
* command line" banner displayed when iPXE starts up. The value is
|
|
* specified in tenths of a second for which the banner should appear.
|
|
* A value of 0 disables the banner.
|
|
*
|
|
* ROM_BANNER_TIMEOUT controls the "Press Ctrl-B to configure iPXE"
|
|
* banner displayed only by ROM builds of iPXE during POST. This
|
|
* defaults to being twice the length of BANNER_TIMEOUT, to allow for
|
|
* BIOSes that switch video modes immediately before calling the
|
|
* initialisation vector, thus rendering the banner almost invisible
|
|
* to the user.
|
|
*/
|
|
#define BANNER_TIMEOUT 20
|
|
#define ROM_BANNER_TIMEOUT ( 2 * BANNER_TIMEOUT )
|
|
|
|
/*
|
|
* Network protocols
|
|
*
|
|
*/
|
|
|
|
#define NET_PROTO_IPV4 /* IPv4 protocol */
|
|
#undef NET_PROTO_IPV6 /* IPv6 protocol */
|
|
#undef NET_PROTO_FCOE /* Fibre Channel over Ethernet protocol */
|
|
|
|
/*
|
|
* PXE support
|
|
*
|
|
*/
|
|
//#undef PXE_STACK /* PXE stack in iPXE - you want this! */
|
|
//#undef PXE_MENU /* PXE menu booting */
|
|
|
|
/*
|
|
* Download protocols
|
|
*
|
|
*/
|
|
|
|
#define DOWNLOAD_PROTO_TFTP /* Trivial File Transfer Protocol */
|
|
#define DOWNLOAD_PROTO_HTTP /* Hypertext Transfer Protocol */
|
|
#undef DOWNLOAD_PROTO_HTTPS /* Secure Hypertext Transfer Protocol */
|
|
#undef DOWNLOAD_PROTO_FTP /* File Transfer Protocol */
|
|
#undef DOWNLOAD_PROTO_SLAM /* Scalable Local Area Multicast */
|
|
#undef DOWNLOAD_PROTO_NFS /* Network File System Protocol */
|
|
|
|
/*
|
|
* SAN boot protocols
|
|
*
|
|
*/
|
|
|
|
//#undef SANBOOT_PROTO_ISCSI /* iSCSI protocol */
|
|
//#undef SANBOOT_PROTO_AOE /* AoE protocol */
|
|
//#undef SANBOOT_PROTO_IB_SRP /* Infiniband SCSI RDMA protocol */
|
|
//#undef SANBOOT_PROTO_FCP /* Fibre Channel protocol */
|
|
|
|
/*
|
|
* 802.11 cryptosystems and handshaking protocols
|
|
*
|
|
*/
|
|
#define CRYPTO_80211_WEP /* WEP encryption (deprecated and insecure!) */
|
|
#define CRYPTO_80211_WPA /* WPA Personal, authenticating with passphrase */
|
|
#define CRYPTO_80211_WPA2 /* Add support for stronger WPA cryptography */
|
|
|
|
/*
|
|
* Name resolution modules
|
|
*
|
|
*/
|
|
|
|
#define DNS_RESOLVER /* DNS resolver */
|
|
|
|
/*
|
|
* Image types
|
|
*
|
|
* Etherboot supports various image formats. Select whichever ones
|
|
* you want to use.
|
|
*
|
|
*/
|
|
//#define IMAGE_NBI /* NBI image support */
|
|
//#define IMAGE_ELF /* ELF image support */
|
|
//#define IMAGE_MULTIBOOT /* MultiBoot image support */
|
|
//#define IMAGE_PXE /* PXE image support */
|
|
//#define IMAGE_SCRIPT /* iPXE script image support */
|
|
//#define IMAGE_BZIMAGE /* Linux bzImage image support */
|
|
//#define IMAGE_COMBOOT /* SYSLINUX COMBOOT image support */
|
|
//#define IMAGE_EFI /* EFI image support */
|
|
//#define IMAGE_SDI /* SDI image support */
|
|
//#define IMAGE_PNM /* PNM image support */
|
|
//#define IMAGE_PNG /* PNG image support */
|
|
|
|
/*
|
|
* Command-line commands to include
|
|
*
|
|
*/
|
|
#define AUTOBOOT_CMD /* Automatic booting */
|
|
#define NVO_CMD /* Non-volatile option storage commands */
|
|
#define CONFIG_CMD /* Option configuration console */
|
|
#define IFMGMT_CMD /* Interface management commands */
|
|
#define IWMGMT_CMD /* Wireless interface management commands */
|
|
#define FCMGMT_CMD /* Fibre Channel management commands */
|
|
#define ROUTE_CMD /* Routing table management commands */
|
|
#define IMAGE_CMD /* Image management commands */
|
|
#define DHCP_CMD /* DHCP management commands */
|
|
#define SANBOOT_CMD /* SAN boot commands */
|
|
#define MENU_CMD /* Menu commands */
|
|
#define LOGIN_CMD /* Login command */
|
|
#define SYNC_CMD /* Sync command */
|
|
//#define NSLOOKUP_CMD /* DNS resolving command */
|
|
//#define TIME_CMD /* Time commands */
|
|
//#define DIGEST_CMD /* Image crypto digest commands */
|
|
//#define LOTEST_CMD /* Loopback testing commands */
|
|
//#define VLAN_CMD /* VLAN commands */
|
|
//#define PXE_CMD /* PXE commands */
|
|
//#define REBOOT_CMD /* Reboot command */
|
|
//#define POWEROFF_CMD /* Power off command */
|
|
//#define IMAGE_TRUST_CMD /* Image trust management commands */
|
|
//#define PCI_CMD /* PCI commands */
|
|
//#define PARAM_CMD /* Form parameter commands */
|
|
//#define NEIGHBOUR_CMD /* Neighbour management commands */
|
|
//#define PING_CMD /* Ping command */
|
|
//#define CONSOLE_CMD /* Console command */
|
|
//#define IPSTAT_CMD /* IP statistics commands */
|
|
//#define PROFSTAT_CMD /* Profiling commands */
|
|
|
|
/*
|
|
* ROM-specific options
|
|
*
|
|
*/
|
|
#undef NONPNP_HOOK_INT19 /* Hook INT19 on non-PnP BIOSes */
|
|
#define AUTOBOOT_ROM_FILTER /* Autoboot only devices matching our ROM */
|
|
|
|
/*
|
|
* Error message tables to include
|
|
*
|
|
*/
|
|
#undef ERRMSG_80211 /* All 802.11 error descriptions (~3.3kb) */
|
|
|
|
/*
|
|
* Obscure configuration options
|
|
*
|
|
* You probably don't need to touch these.
|
|
*
|
|
*/
|
|
|
|
#define NETDEV_DISCARD_RATE 0 /* Drop every N packets (0=>no drop) */
|
|
#undef BUILD_SERIAL /* Include an automatic build serial
|
|
* number. Add "bs" to the list of
|
|
* make targets. For example:
|
|
* "make bin/rtl8139.dsk bs" */
|
|
#undef BUILD_ID /* Include a custom build ID string,
|
|
* e.g "test-foo" */
|
|
#undef NULL_TRAP /* Attempt to catch NULL function calls */
|
|
#undef GDBSERIAL /* Remote GDB debugging over serial */
|
|
#undef GDBUDP /* Remote GDB debugging over UDP
|
|
* (both may be set) */
|
|
|
|
#include <config/named.h>
|
|
#include NAMED_CONFIG(general.h)
|
|
#include <config/local/general.h>
|
|
#include LOCAL_NAMED_CONFIG(general.h)
|
|
|
|
#endif /* CONFIG_GENERAL_H */
|