Michael Brown 5fbd0207b2 [settings] Display canonical setting name in output of "show" command ...

Enable the "show" command to display the full, canonicalised name of
the fetched setting.  For example:

  iPXE> show mac
  net0/mac:hex = 52:54:00:12:34:56

  iPXE> dhcp && show ip
  DHCP (net0 52:54:00:12:34:56)... ok
  net0.dhcp/ip:ipv4 = 10.0.0.168

  iPXE> show net0/6
  net0.dhcp/dns:ipv4 = 10.0.0.6

Inspired-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>

2011-03-22 20:13:50 +00:00

..

autoboot_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

config_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

dhcp_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

digest_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

fcmgmt_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

gdbstub_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

ifmgmt_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

image_cmd.c

[image] Simplify use of imgdownload()

2011-03-09 16:57:34 +00:00

iwmgmt_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

login_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

lotest_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

nvo_cmd.c

[settings] Display canonical setting name in output of "show" command

2011-03-22 20:13:50 +00:00

route_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

sanboot_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

time_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00

vlan_cmd.c

[parseopt] Refer to online documentation for command help

2011-03-04 12:18:51 +00:00