Specify a driver name of "undionly" and a device name based on the
UNDI-reported underlying hardware device. For example:
net0: 52:54:00:12:34:56 using undionly on UNDI-PCI00:03.0 (open)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The symbol_text16 is defined globally by the linker. Use rm_text16
instead of _text16 for the local variable within librm.S to avoid
confusion when reading linker maps.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
All users of imgdownload() require registration of the image, so make
registration an integral part of imgdownload() itself and simplify the
"action" parameter to be one of image_select(), image_exec() et al.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE specifies a value of 0 for cmdline_size, causing GRUB to not pass
in a command line. Fix by setting cmdline_size to the maximum value
of 2047.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow the link layer to directly report whether or not a packet is
multicast or broadcast at the time of calling pull(), rather than
relying on heuristics to determine this at a later stage.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow objects to support both streaming and block device protocols, by
starting streaming data only when the data transfer window opens.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some bootloaders seem to add "BOOT_IMAGE=..." at the end of the
command line; some at the start. Cope with either variation.
Reported-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
IBM BIOSes ignore the PnP header offset stored at address 0x1a and
instead scan for the $PnP signature on a 16-byte boundary. (This
alignment is not mandated by the PnP specification.)
Force PnP header to a 16-byte boundary to work around these BIOSes.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Several BIOSes (including most IBM BIOSes and many virtual machine
BIOSes) do not provide detectable PnP support, but will use the BEV
entry point for a PnP option ROM. On these semi-PnP BIOSes, iPXE will
respond to the absence of detectable PnP support by hooking INT19,
which disrupts the boot order.
BIOSes that genuinely require hooking INT19 seem to be very rare
nowadays. It may therefore be preferable to assume that the absence
of detectable PnP support indicates a semi-PnP BIOS rather than a
non-PnP BIOS.
Change the default behaviour so that INT19 will never be hooked unless
the compile-time option NONPNP_HOOK_INT19 is enabled. Leave the
redundant PnP detection routine in-place to allow for debugging via
the ROM banner line.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Revert commit 38cd351 ("[romprefix] Attempt to gracefully handle
semi-PnP IBM BIOSes"), since the test for the "IBM " signature in %edi
is not sufficient to identify an IBM BIOS.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some IBM BIOSes provide partial support for PnP: they will use the BEV
entry point but will not advertise PnP support. This causes iPXE to
hook INT 19, which disrupts the boot process.
Attempt to improve this situation by detecting an IBM BIOS and
treating it as a PnP BIOS despite the absence of a PnP signature.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of binutils have curious concepts of what constitutes
subtraction. For example:
0x00000000000000f0 _text16_late = .
0x0000000000000898 _mtext16 = .
0x0000000000000898 _etext16 = .
0x0000000000000898 _text16_late_filesz = ABSOLUTE ((_mtext16 - _text16_late))
0x00000000000007a8 _text16_late_memsz = ABSOLUTE ((_etext16 - _text16_late))
This has interesting side-effects such as producing sizes for .bss
segments that are negative, causing the majority of addressable memory
to be zeroed out.
Fix by using the form
ABSOLUTE ( x ) - ABSOLUTE ( y )
rather than
ABSOLUTE ( x - y )
Reported-by: H. Peter Anvin <hpa@zytor.com>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Tested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This allows older versions of ELTORITO.SYS (such as the version found
on the FreeDOS installation CD-ROM) to use iPXE's emulated CD-ROM
drive.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose the multiple-SAN-drive capability of the iPXE core via the iPXE
command line by adding commands to hook and unhook additional drives.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some PXE stacks (notably old Etherboot/gPXE stacks) will claim to use
the timer interrupt, rather than reporting that interrupts are not
supported. Since using the timer interrupt is equivalent to polling
anyway, we may as well genuinely poll these stacks.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
An iPXE .exe image can be loaded from DOS. Tested using bin/ipxe.exe
to load a Linux kernel and simple initramfs from within MS-DOS 6.22.
(EDD must be disabled using the "edd=off" kernel parameter, since the
loaded kernel image has already overwritten parts of DOS' INT 13
wrapper.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
In the unlikely (but observable) event that INT 15,88 returns less
memory above 1MB than is required for the temporary decompression
area, ignore it and use the 1MB point anyway.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Make the allocators used by malloc and linux_umalloc valgrindable.
Include valgrind headers in the codebase to avoid a build dependency
on valgrind.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some PXE stacks advertise that interrupts are not supported, despite
requiring the use of interrupts. Attempt to cope with such cards
without breaking others by always hooking the interrupt, and using the
"interrupts supported" flag only to decide whether or not to wait for
an interrupt before calling PXENV_UNDI_ISR_IN_PROCESS.
The possible combinations are therefore:
1. Card generates interrupts and claims to support interrupts
iPXE will call PXENV_UNDI_ISR_IN_PROCESS only after an interrupt
has been observed. (This is required to avoid lockups in some PXE
stacks, which spuriously sulk if called before an interrupt has
been generated.)
Such a card should work correctly.
2. Card does not generate interrupts and does not claim to support
interrupts
iPXE will call PXENV_UNDI_ISR_IN_PROCESS indiscriminately, matching
the observed behaviour of at least one other PXE NBP (winBoot/i).
Such a card should work correctly.
3. Card generates interrupts but claims not to support interrupts
iPXE will call PXENV_UNDI_ISR_IN_PROCESS indiscriminately. An
interrupt will still result in a call to PXENV_UNDI_ISR_IN_START.
Such a card may work correctly.
4. Card does not generate interrupts but claims to support interrupts
Such a card will not work at all.
Reported-by: Jerry Cheng <jaspers.cheng@msa.hinet.net>
Tested-by: Jerry Cheng <jaspers.cheng@msa.hinet.net>
Reported-by: Mauricio Silveira <mauricio@livreti.com.br>
Tested-by: Mauricio Silveira <mauricio@livreti.com.br>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE allocates its first PMM block using the image source length,
which is rounded up to the nearest 16-byte paragraph. It then copies
in data of a length calculated from the ROM size, which is
theoretically less than or equal to the image source length, but is
rounded up to the nearest 512-byte sector. This can result in copying
beyond the end of the allocated PMM block, which can corrupt the PMM
data structures (and other essentially arbitrary areas of memory).
Fix by rounding up the image source length to the nearest 512-byte
sector before using it as the PMM allocation length.
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Jarrod Johnson <jarrod.b.johnson@gmail.com>
Reported-by: Itay Gazit <itayg@mellanox.co.il>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
INT 16,01 will discard some extended keystrokes on some BIOSes, making
it impossible for iPXE to detect keypresses such as F12. Fix by using
INT 16,11 instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some prefixes (e.g. .lkrn) allow a command line to be passed in to
iPXE. At present, this command line is ignored.
If a command line is provided, treat it as an embedded script (without
an explicit "#!ipxe" magic marker). This allows for patterns of
invocation such as
title iPXE
kernel /boot/ipxe.lkrn dhcp && \
sanboot iscsi:10.0.4.1::::iqn.2010-04.org.ipxe.dolphin:storage
Here GRUB is instructed to load ipxe.lkrn with an embedded script
equivalent to
#!ipxe
dhcp
sanboot iscsi:10.0.4.1::::iqn.2010-04.org.ipxe.dolphin:storage
This can be used to effectively vary the embedded script without
having to rebuild ipxe.lkrn.
Originally-implemented-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The function keys F5-F12 all conform to the same ANSI pattern as the
other "special" keys that we currently recognise. Add these key
definitions, and shrink the representation of the ANSI sequences in
bios_console.c to compensate.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Refactor the {load,exec} image operations as {probe,exec}. This makes
the probe mechanism cleaner, eliminates some forward declarations,
avoids holding magic state in image->priv, eliminates the possibility
of screwing up between the "load" and "exec" stages, and makes the
documentation simpler since the concept of "loading" (as distinct from
"executing") no longer needs to be explained.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The online documentation (e.g. http://ipxe.org/cmd/ifopen), though not
yet complete, is far more comprehensive than could be provided within
the iPXE binary. Save around 200 bytes (compressed) by removing the
command descriptions from the interactive help, and instead referring
users directly to the web page describing the relevant command.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently use INT 13,00 as an opportunity to reopen the underlying
block device, which works well for callers such as DOS that will use
INT 13,00 in response to any disk errors. However, some callers (such
as Windows Server 2008) do not attempt to reset the disk, and so any
failures become effectively permanent.
Fix this by automatically reopening the underlying block device
whenever we might want to access it.
This makes direct installation of Windows to an iSCSI target much more
reliable.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "size" bit (aka the D/B) bit should (as far as I can tell) be
irrelevant for accesses to a non-code, non-stack, expand-upwards
segment. However, VirtualBox fails on some accesses via this segment
if this bit is not set.
This change allows iPXE to boot under VirtualBox without having to
disable VT-x/AMD-V support.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some binutils versions will drag in an object to satisfy the entry
symbol; some won't. Try to cope with this exciting variety of
behaviour by ensuring that all entry symbols are unique.
Remove the explicit inclusion of the prefix object on the linker
command line, since the entry symbol now provides all the information
needed to identify the prefix.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 623469d ("[build] Eliminate unused sections at link-time")
introduced a regression in several build formats, in which the prefix
would end up being garbage-collected out of existence. Fix by
ensuring that an entry symbol exists in each possible prefix, and is
required by the linker script.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use -ffunction-sections, -fdata-sections, and --gc-sections to
automatically prune out any unreferenced sections.
This saves around 744 bytes (uncompressed) from the rtl8139.rom build.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
