def5ae9127
Added sw2hw_mpt
2007-09-18 04:45:55 +01:00
da014080f9
INIT_HCA block now matches.
2007-09-18 04:20:41 +01:00
57bf8d9905
Seems to get through the ICM mapping process
2007-09-18 03:58:59 +01:00
4ea6223f5a
ICM allocation code in place; about to start test-and-compare runs.
2007-09-18 02:57:49 +01:00
f20cd6f721
ICM allocation code *should* now be complete.
2007-09-18 02:05:25 +01:00
af88f60228
Started with the ICM partitioning code.
2007-09-18 01:49:39 +01:00
c818d47e25
Restructured bits of initialisation (not testable at present)
2007-09-17 22:25:46 +01:00
dc3165b746
Starting the firmware directly now works.
2007-09-17 21:59:41 +01:00
0f62bcaa77
Start migrating the remaining initialisation steps.
2007-09-17 21:14:09 +01:00
f3fcb53faf
Don't use the mailboxless version of the HW2SW_CQ command; it seems to
...
crash the machine.
2007-09-17 19:47:19 +01:00
12b4cb964b
Removed more hacks, and adjusted number of queue entries for likely usage.
2007-09-17 19:17:55 +01:00
11541b1e01
Remove hacks, and fix leaving the multicast GID.
2007-09-17 19:12:06 +01:00
267a4483ab
Added an almost obscene amount of debugging and assertion code while
...
tracking down a bug that turned out to be a free_iob() used where I
needed a netdev_tx_complete(). This left the freed I/O buffer on the
net device's TX list, with bad, bad consequences later.
Also fixed the bug in question.
2007-09-17 19:01:10 +01:00
bdac591726
Some interesting packet corruption happening now.
2007-09-17 13:31:13 +01:00
2ed1acb9e9
Broadcast GID is now calculated by IPoIB layer.
2007-09-17 11:50:25 +01:00
32a7bbb1e3
Cleaned up some debug messages.
2007-09-17 10:56:21 +01:00
ab191e45db
Unicasts seem to be working. :)
2007-09-17 10:39:30 +01:00
2209090120
Dead code disabling
2007-09-17 08:41:06 +01:00
b3d3814c17
Obtains a response to the get path record!
2007-09-17 08:36:56 +01:00
e05a8cd4de
Use pkey table access to determine broadcast GID directly.
2007-09-17 06:35:21 +01:00
f6f1f2b7bb
Prepare for adding a metadata queue to IPoIB
2007-09-17 06:12:33 +01:00
440e7926fb
Dead code removal
2007-09-17 05:12:47 +01:00
4e78a53cf2
IPoIB code separated out to ipoib.c.
2007-09-17 05:04:58 +01:00
67836430e6
Read port GID directly using MAD IFC.
2007-09-17 02:54:15 +01:00
3c6a6bdc5d
Multicast join now works.
2007-09-17 00:24:44 +01:00
96d0c75c00
Now transmits packets on our own allocated IPoIB queue pair. :)
2007-09-16 22:53:57 +01:00
4ddb6570f8
Almost working with own-queue allocation.
2007-09-16 22:47:45 +01:00
7e85f0d296
create_qp() and destroy_qp() now written (but not tested).
2007-09-16 20:54:21 +01:00
251cc84ed6
Started implementing create_qp() and destroy_qp().
2007-09-16 19:03:24 +01:00
b21d4ca21e
Revert to dev_priv/owner_priv scheme, rather than container_of; it
...
makes it easier to put the generic allocation code into infiniband.c
2007-09-16 17:25:15 +01:00
e238bb1e43
destroy_cq() now implemented (not tested).
2007-09-16 14:39:51 +01:00
18edcf6634
create_cq() implemented (but not tested).
2007-09-16 14:18:17 +01:00
725a574042
Match doorbell layout to expected usage.
2007-09-16 13:10:15 +01:00
5a43293c38
Started to add code for CQ creation
2007-09-16 12:52:58 +01:00
156b409ccc
Rearrange data structures to maximise embedding (and hence minimise
...
the number of separate allocations that need to be done).
2007-09-16 04:02:20 +01:00
791f992657
Command interface now reasonably friendly.
2007-09-16 03:13:25 +01:00
bf9bd93856
First (working) draft of command interface.
2007-09-16 01:44:57 +01:00
baa885ee8e
Kill off more dead code.
2007-09-15 23:36:41 +01:00
37fc40bc8c
post_recv() now works, and we can pass data on the IPoIB queue pair
...
using entirely our own code.
2007-09-15 23:33:25 +01:00
838b972cd3
Kill off some dead code
2007-09-15 21:26:14 +01:00
31b82ea1dd
Hack up IB structures at start-of-day, instead of on each use.
2007-09-15 21:23:34 +01:00
8deef093d9
Direct polling of TX completion queue now works.
2007-09-15 20:58:29 +01:00
6a791649f0
Updated MLX_* accessor macros to use implicit type information.
2007-09-15 18:44:09 +01:00
a3a91fedc1
Started added poll_cq() verb.
...
Started reworking MLX_EXTRACT(), MLX_POPULATE() etc. to automatically
determine type information.
2007-09-15 15:40:35 +01:00
37a036bd48
Map the whole of physical memory
2007-09-15 03:22:04 +01:00
970951666f
arbel_post_send() has been observed to transmit a packet!
2007-09-15 02:53:05 +01:00
8b27da9de1
Gets a response out of the hardware. (An error completion, to be precise.)
2007-09-15 01:35:07 +01:00
21d4ab3ce2
Prefix arbel-specific functions etc. with arbel_
2007-09-15 00:27:09 +01:00
38a73b55c4
Now at least compiles
2007-09-15 00:19:38 +01:00
9d08b7c692
Starting to introduce an Infiniband device abstraction
2007-09-14 20:29:44 +01:00
Michael Brown