Use standard void pointers for umalloc(), urealloc(), and ufree(),
with the "u" prefix retained to indicate that these allocations are
made from external ("user") memory rather than from the internal heap.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Simplify the SMBIOS structure parsing code by assuming that all
structure content is fully accessible via pointer dereferences.
In particular, this allows the convoluted find_smbios_structure() and
read_smbios_structure() to be combined into a single function
smbios_structure() that just returns a direct pointer to the SMBIOS
structure, with smbios_string() similarly now returning a direct
pointer to the relevant string.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Simplify the ACPI table parsing code by assuming that all table
content is fully accessible via pointer dereferences.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove the intermediate concept of a user pointer from physical
address conversions, leaving virt_to_phys() and phys_to_virt() as the
directly implemented functions.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The user_to_virt() function is now a straightforward wrapper around
addition, with the addend almost invariably being zero.
Remove this redundant wrapper.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The memcpy_user(), memmove_user(), memcmp_user(), memset_user(), and
strlen_user() functions are now just straightforward wrappers around
the corresponding standard library functions.
Remove these redundant wrappers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The userptr_add() and userptr_diff() functions are now just
straightforward wrappers around addition and subtraction.
Remove these redundant wrappers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI device model requires us to not probe the PCI bus directly,
but instead to wait to be offered the opportunity to drive devices via
our driver service binding handle.
We currently inhibit PCI bus probing by having pci_discover() return
an empty range when using the EFI PCI I/O API. This has the unwanted
side effect that scanning the bus manually using the "pciscan" command
will also fail to discover any devices.
Separate out the concept of being allowed to probe PCI buses from the
mechanism for discovering PCI bus:dev.fn address ranges, so that this
limitation may be removed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As noted in commit 3c83843 ("[rng] Check for several functioning RTC
interrupts"), experimentation shows that Hyper-V cannot be trusted to
reliably generate RTC interrupts. (As noted in commit f3ba0fb
("[hyperv] Provide timer based on the 10MHz time reference count
MSR"), Hyper-V appears to suffer from a general problem in reliably
generating any legacy interrupts.) An alternative entropy source is
therefore required for an image that may be used in a Hyper-V Gen1
virtual machine.
The x86 RDRAND instruction provides a suitable alternative entropy
source, but may not be supported by all CPUs. We must therefore allow
for multiple entropy sources to be compiled in, with the single active
entropy source selected only at runtime.
Restructure the internal entropy API to allow a working entropy source
to be detected and chosen at runtime.
Enable the RDRAND entropy source for all x86 builds, since it is
likely to be substantially faster than any other source.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow pci_find_next() to discover devices beyond the first PCI
segment, by generalising pci_num_bus() (which implicitly assumes that
there is only a single PCI segment) with pci_discover() (which has the
ability to return an arbitrary contiguous chunk of PCI bus:dev.fn
address space).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The iPXE build system is constructed for a standalone codebase with no
external dependencies, and does not have any equivalent of the
standard userspace ./configure script. We currently check for the
ability to include slirp/libslirp.h and conditionalise portions of
linux_api.c on its presence. The actual slirp driver code is built
unconditionally, as with all iPXE drivers.
This currently leads to a silent runtime failure if attempting to use
slirp.linux built on a system that was missing slirp/libslirp.h.
Convert this to a link-time failure by deliberately omitting the
relevant symbols from linux_api.c when slirp/libslirp.h is not
present. This allows other builds (e.g. tap.linux or tests.linux) to
succeed: the link-time failure will occur only if the slirp driver is
included within the build target.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Linux kernel 3.12 and earlier report a zero size via stat() for all
ACPI table files in sysfs. There is no way to determine the file size
other than by reading the file until EOF.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Consumers of acpi_find() will assume that returned structures include
a valid table header and that the length in the table header is
correct. These assumptions are necessary when dealing with raw ACPI
tables, since there exists no independent source of length
information.
Ensure that these assumptions are also valid for ACPI tables read from
sysfs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The statx() system call has a clean header file and a consistent
layout, but was unfortunately added only in kernel 4.11.
Using stat() or fstat() directly is extremely messy since glibc does
not necessarily use the kernel native data structures. However, as
the only current use case is to obtain the length of an open file, we
can merely provide a wrapper that does precisely this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Versions of gcc prior to 9.1 do not support the single-argument form
of static_assert(). Fix by unconditionally defining a compatibility
macro for the single file that uses this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a driver using libslirp to provide a virtual network interface
without requiring root permissions on the host. This simplifies the
process of running iPXE as a Linux userspace application with network
access. For example:
make bin-x86_64-linux/slirp.linux
./bin-x86_64-linux/slirp.linux --net slirp
libslirp will provide a built-in emulated DHCP server and NAT router.
Settings such as the boot filename may be controlled via command-line
options. For example:
./bin-x86_64-linux/slirp.linux \
--net slirp,filename=http://192.168.0.1/boot.ipxe
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When building as a Linux userspace application, iPXE currently
implements its own system calls to the host kernel rather than relying
on the host's C library. The output binary is statically linked and
has no external dependencies.
This matches the general philosophy of other platforms on which iPXE
runs, since there are no external libraries available on either BIOS
or UEFI bare metal. However, it would be useful for the Linux
userspace application to be able to link against host libraries such
as libslirp.
Modify the build process to perform a two-stage link: first picking
out the requested objects in the usual way from blib.a but with
relocations left present, then linking again with a helper object to
create a standard hosted application. The helper object provides the
standard main() entry point and wrappers for the Linux system calls
required by the iPXE Linux drivers and interface code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow the active timer (providing udelay() and currticks()) to be
selected at runtime based on probing during the INIT_EARLY stage of
initialisation.
TICKS_PER_SEC is now a fixed compile-time constant for all builds, and
is independent of the underlying clock tick rate. We choose the value
1024 to allow multiplications and divisions on seconds to be converted
to bit shifts.
TICKS_PER_MS is defined as 1, allowing multiplications and divisions
on milliseconds to be omitted entirely. The 2% inaccuracy in this
definition is negligible when using the standard BIOS timer (running
at around 18.2Hz).
TIMER_RDTSC now checks for a constant TSC before claiming to be a
usable timer. (This timer can be tested in KVM via the command-line
option "-cpu host,+invtsc".)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Rewrite (and relicense) the header files which are included in all
builds of iPXE (including non-Linux builds).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE uses currticks() (along with the MAC address(es) of any network
devices) to seed the (non-cryptographic) random number generator. The
current implementation of linux_currticks() ensures that the first
call to currticks() will always return zero; this results in identical
random number sequences on each run of iPXE on a given machine. This
can cause odd-looking behaviour due to e.g. the reuse of local TCP
port numbers.
Fix by effectively rounding down the start time recorded by
linux_currticks() to the nearest whole second; this makes it unlikely
that consecutive runs of iPXE will use the exact same RNG sequence.
(Note that none of this affects the cryptographic RNG, which uses
/dev/random as a source of entropy.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add the concept of a "console usage", such as "standard output" or
"debug messages". Allow usages to be associated with each console
independently. For example, to send debugging output via the serial
port, while preventing it from appearing on the local console:
#define CONSOLE_SERIAL CONSOLE_USAGE_ALL
#define CONSOLE_PCBIOS ( CONSOLE_USAGE_ALL & ~CONSOLE_USAGE_DEBUG )
If no usages are explicitly specified, then a default set of usages
will be applied. For example:
#define CONSOLE_SERIAL
will have the same affect as
#define CONSOLE_SERIAL CONSOLE_USAGE_ALL
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Make the allocators used by malloc and linux_umalloc valgrindable.
Include valgrind headers in the codebase to avoid a build dependency
on valgrind.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There exists an smbios userspace library so implementing this is
probably possible, but doesn't seem really important to have in
userspace. Hence provide a dummy implementation returning an error.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add user access API for linux.
On linux userspace virtual == user == phys addresses. Physical
addresses also being the same is wrong, but there is no general way of
converting userspace addresses to physical as what appears to be
contiguous in userspace is physically fragmented. Currently only the
DMA memory is special-cased, but its conversion to bus addresses is
done in phys_to_bus. This is known to break virtio as it is passing
phys addresses to the virtual device.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add linux console using stdin/out. Configure the attached terminal for
readline use.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
