The ACPI MCFG table describes a direct mapping of PCI configuration
space into MMIO space. This mapping allows access to extended
configuration space (up to 4096 bytes) and also provides for the
existence of multiple host bridges.
Add support for the ECAM mechanism described by the ACPI MCFG table,
as a selectable PCI I/O API alongside the existing PCI BIOS and Type 1
mechanisms.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow pci_find_next() to discover devices beyond the first PCI
segment, by generalising pci_num_bus() (which implicitly assumes that
there is only a single PCI segment) with pci_discover() (which has the
ability to return an arbitrary contiguous chunk of PCI bus:dev.fn
address space).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The semantics of the bus:dev.fn parameter passed to pci_find_next()
are "find the first existent PCI device at this address or higher",
with the caller expected to increment the address between finding
devices. This does not allow the parameter to distinguish between the
two cases "start from address zero" and "wrapped after incrementing
maximal possible address", which could therefore lead to an infinite
loop in the degenerate case that a device with address ffff:ff:1f.7
really exists.
Fix by checking for wraparound in the caller (which is already
responsible for performing the increment).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Separate the return status code from the returned PCI bus:dev.fn
address, in order to allow pci_find_next() to be used to find devices
with a non-zero PCI segment number.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a driver for the E810 family of 100 Gigabit Ethernet NICs. The
core datapath is identical to that of the 40 Gigabit XL710, and this
part of the code is shared between both drivers. The admin queue
mechanism is sufficiently similar to make it worth reusing substantial
portions of the code, with separate implementations for several
commands to handle the (unnecessarily) breaking changes in data
structure layouts. The major differences are in the mechanisms for
programming queue contexts (where the E810 abandons TX/RX symmetry)
and for configuring the transmit scheduler and receive filters: these
portions are sufficiently different to justify a separate driver.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For symmetry with the stub user_to_phys() implementation, provide
phys_to_user() with the same underlying assumption that virtual
addresses are physical (since there is no way to know the real
physical address when running as a Linux userspace executable).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for linked-in code to override the mechanism used to locate an
ACPI table, thereby opening up the possibility of ACPI self-tests.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Accumulate UTF-8 characters in fbcon_putchar(), and require the frame
buffer console's .glyph() method to accept Unicode character values.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide the special keyboard map named "dynamic" which allows the
active keyboard map to be selected at runtime via the ${keymap}
setting, e.g.:
#define KEYBOARD_MAP dynamic
iPXE> set keymap uk
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Several keyboard layouts define ASCII characters as accessible only
via the AltGr modifier. Add support for this modifier to ensure that
all ASCII characters are accessible.
Experiments suggest that the BIOS console is likely to fail to
generate ASCII characters when the AltGr key is pressed. Work around
this limitation by accepting LShift+RShift (which will definitely
produce an ASCII character) as a synonym for AltGr.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Handle Ctrl and CapsLock key modifiers within key_remap(), to provide
consistent behaviour across different console types.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Separate the concept of a keyboard mapping from a list of remapped
keys, to allow for the possibility of supporting multiple keyboard
mappings at runtime.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The compound statement expression within __table_entries() prevents
the use of top-level declarations such as
static struct thing *things = table_start ( THINGS );
Define TABLE_START() and TABLE_END() macros that can be used as:
static TABLE_START ( things_start, THINGS );
static struct thing *things = things_start;
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The key with scancode 86 appears in the position between left shift
and Z on a US keyboard, where it typically fails to exist entirely.
Most US keyboard maps define this nonexistent key as generating "\|",
with the notable exception of "loadkeys" which instead reports it as
generating "<>". Both of these mapping choices duplicate keys that
exist elsewhere in the map, which causes problems for our ASCII-based
remapping mechanism.
Work around these quirks by treating the key as generating "\|" with
the high bit set, and making it subject to remapping. Where the BIOS
generates "\|" as expected, this allows us to remap to the correct
ASCII value.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
SBAT defines an encoding for security generation numbers stored as a
CSV file within a special ".sbat" section in the signed binary. If a
Secure Boot exploit is discovered then the generation number will be
incremented alongside the corresponding fix.
Platforms may then record the minimum generation number required for
any given product. This allows for an efficient revocation mechanism
that consumes minimal flash storage space (in contrast to the DBX
mechanism, which allows for only a single-digit number of revocation
events to ever take place across all possible signed binaries).
Add SBAT metadata to iPXE EFI binaries to support this mechanism.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The RFC4122 specification defines UUIDs as being in network byte
order, but an unfortunately significant amount of (mostly Microsoft)
software treats them as having the first three fields in little-endian
byte order.
In an ideal world, any server-side software that compares UUIDs for
equality would perform an endian-insensitive comparison (analogous to
comparing strings for equality using a case-insensitive comparison),
and would therefore not care about byte order differences.
Define a setting type name ":guid" to allow a UUID setting to be
formatted in little-endian order, to simplify interoperability with
server-side software that expects such a formatting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On some systems (observed with the Thunderbolt ports on a ThinkPad X1
Extreme Gen3 and a ThinkPad P53), if the IOMMU is enabled then the
system firmware will install an ExitBootServices notification event
that disables bus mastering on the Thunderbolt xHCI controller and all
PCI bridges, and destroys any extant IOMMU mappings. This leaves the
xHCI controller unable to perform any DMA operations.
As described in commit 236299b ("[xhci] Avoid DMA during shutdown if
firmware has disabled bus mastering"), any subsequent DMA operation
attempted by the xHCI controller will end up completing after the
operating system kernel has reenabled bus mastering, resulting in a
DMA operation to an area of memory that the hardware is no longer
permitted to access and, on Windows with the Driver Verifier enabled,
a STOP 0xE6 (DRIVER_VERIFIER_DMA_VIOLATION).
That commit avoids triggering any DMA attempts during the shutdown of
the xHCI controller itself. However, this is not a complete solution
since any attached and opened USB device (e.g. a USB NIC) may
asynchronously trigger DMA attempts that happen to occur after bus
mastering has been disabled but before we reset the xHCI controller.
Avoid this problem by installing our own ExitBootServices notification
event at TPL_NOTIFY, thereby causing it to be invoked before the
firmware's own ExitBootServices notification event that disables bus
mastering.
This unsurprisingly causes the shutdown hook itself to be invoked at
TPL_NOTIFY, which causes a fatal error when later code attempts to
raise the TPL to TPL_CALLBACK (which is a lower TPL). Work around
this problem by redefining the "internal" iPXE TPL to be variable, and
set this internal TPL to TPL_NOTIFY when the shutdown hook is invoked.
Avoid calling into an underlying SNP protocol instance from within our
shutdown hook at TPL_NOTIFY, since the underlying SNP driver may
attempt to raise the TPL to TPL_CALLBACK (which would cause a fatal
error). Failing to shut down the underlying SNP device is safe to do
since the underlying device must, in any case, have installed its own
ExitBootServices hook if any shutdown actions are required.
Reported-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The EFI loaded image protocol allows an image to be provided with a
custom system table, and we currently use this mechanism to wrap any
boot services calls made by the loaded image in order to provide
strace-like debugging via DEBUG=efi_wrap.
The ExitBootServices() call will modify the global system table,
leaving the loaded image using a system table that is no longer
current. When DEBUG=efi_wrap is used, this generally results in the
machine locking up at the point that the loaded operating system calls
ExitBootServices().
Fix by modifying the global EFI system table to point to our wrapper
functions, instead of providing a custom system table via the loaded
image protocol.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE decodes any percent-encoded characters during the URI parsing
stage, thereby allowing protocol implementations to consume the raw
field values directly without further decoding.
When reconstructing a URI string for use in an HTTP request line, the
percent-encoding is currently reapplied in a reversible way: we
guarantee that our reconstructed URI string could be decoded to give
the same raw field values.
This technically violates RFC3986, which states that "URIs that differ
in the replacement of a reserved character with its corresponding
percent-encoded octet are not equivalent". Experiments show that
several HTTP server applications will attach meaning to the choice of
whether or not a particular character was percent-encoded, even when
the percent-encoding is unnecessary from the perspective of parsing
the URI into its component fields.
Fix by storing the originally encoded substrings for the path, query,
and fragment fields and using these original encoded versions when
reconstructing a URI string. The path field is also stored as a
decoded string, for use by protocols such as TFTP that communicate
using raw strings rather than URI-encoded strings. All other fields
(such as the username and password) continue to be stored only in
their decoded versions since nothing ever needs to know the originally
encoded versions of these fields.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some vendors provide a "system MAC address" within the DSDT/SSDT, to
be used to override the MAC address for a USB docking station.
A full implementation would require an ACPI bytecode interpreter,
since at least one OEM allows the MAC address to be constructed by
executable ACPI bytecode (rather than a fixed data structure).
We instead attempt to extract a plausible-looking "_AUXMAC_#.....#"
string that appears shortly after an "AMAC" or "MACA" signature. This
should work for most implementations encountered in practice.
Debugged-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for the DSDT/SSDT signature-scanning and value extraction code
to be reused for extracting a pass-through MAC address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit cd3de55 ("[efi] Record cached DHCPACK from loaded image's
device handle, if present") added the ability for a chainloaded UEFI
iPXE to reuse an IPv4 address and DHCP options previously obtained by
a built-in PXE stack, without needing to perform a second DHCP
request.
Extend this to also record the cached ProxyDHCPOFFER and PXEBSACK
obtained from the EFI_PXE_BASE_CODE_PROTOCOL instance installed on the
loaded image's device handle, if present.
This allows a chainloaded UEFI iPXE to reuse a boot filename or other
options that were provided via a ProxyDHCP or PXE boot server
mechanism, rather than by standard DHCP.
Tested-by: Andreas Hammarskjöld <junior@2PintSoftware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When building the Linux userspace binaries, the external system
headers may have already defined values for the __LITTLE_ENDIAN and
__BIG_ENDIAN constants.
Fix by retaining the existing values if already defined, since the
actual values of these constants do not matter.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The RTL8211B seems to have a bug that prevents the link from coming up
unless the MII_MMD_DATA register is cleared.
The Linux kernel driver applies this workaround (in rtl8211b_resume())
only to the specific RTL8211B PHY model, along with a matching
workaround to set bit 9 of MII_MMD_DATA when suspending the PHY.
Since we have no need to ever suspend the PHY, and since writing a
zero ought to be harmless, we just clear the register unconditionally.
Debugged-by: Nikolay Pertsev <nikolay.p@cos.flag.org>
Tested-by: Nikolay Pertsev <nikolay.p@cos.flag.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most RNDIS data structures include a trailing 4-byte reserved field.
For the REMOTE_NDIS_PACKET_MSG and REMOTE_NDIS_INITIALIZE_CMPLT
structures, this is an 8-byte field instead.
iPXE currently uses incorrect structure definitions with a 4-byte
reserved field in all data structures, resulting in data payloads that
overlap the last 4 bytes of the 8-byte reserved field.
RNDIS uses explicit offsets to locate any data payloads beyond the
message header, and so liberal RNDIS parsers (such as those used in
Hyper-V and in the Linux USB Ethernet gadget driver) are still able to
parse the malformed structures.
A stricter RNDIS parser (such as that found in some older Android
builds that seem to use an out-of-tree USB Ethernet gadget driver) may
reject the malformed structures since the data payload offset is less
than the header length, causing iPXE to be unable to transmit packets.
Fix by correcting the length of the reserved fields.
Debugged-by: Martin Nield <pmn1492@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE will construct CPIO headers for images that have a non-empty
command line, thereby allowing raw images (without CPIO headers) to be
injected into a dynamically constructed initrd. This feature is
currently implemented within the BIOS-only bzImage format support.
Split out the CPIO header construction logic to allow for reuse in
other contexts such as in a UEFI build.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide image_extract_exec() as a helper method to allow single-member
archive images (such as gzip compressed images) to be executed without
an explicit "imgextract" step.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add the concept of extracting an image from an archive (which could be
a single-file archive such as a gzip-compressed file), along with an
"imgextract" command to expose this functionality to scripts.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The use of jumbo frames for the Xen netfront virtual NIC requires the
use of scatter-gather ("feature-sg"), with the receive descriptor ring
becoming a list of page-sized buffers and the backend using as many
page buffers as required for each packet.
Since iPXE's abstraction of an I/O buffer does not include any sort of
scatter-gather list, this requires an extra allocation and copy on the
receive datapath for any packet that spans more than a single page.
This support is required in order to successfully boot an AWS EC2
virtual machine (with non-enhanced networking) via iSCSI if jumbo
frames are enabled, since the netback driver used in EC2 seems not to
allow "feature-sg" to be renegotiated once the Linux kernel driver
takes over.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When CONSOLE_SYSLOG is used, a DBG() from within a network device
driver may cause its transmit() or poll() methods to be unexpectedly
re-entered. Since these methods are not intended to be re-entrant,
this can lead to undefined behaviour.
Add an explicit re-entrancy guard to both methods. Note that this
must operate at a per-netdevice level, since there are legitimate
circumstances under which the netdev_tx() or netdev_poll() functions
may be re-entered (e.g. when using VLAN devices).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is no method for obtaining the number of PCI buses when using
PCIAPI_DIRECT, and we therefore currently scan all possible bus
numbers. This can cause a several-second startup delay in some
virtualised environments, since PCI configuration space access will
necessarily require the involvement of the hypervisor.
Ameliorate this situation by defaulting to scanning only a single bus,
and expanding the number of PCI buses to accommodate any subordinate
buses that are detected during enumeration.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Consumers of acpi_find() will assume that returned structures include
a valid table header and that the length in the table header is
correct. These assumptions are necessary when dealing with raw ACPI
tables, since there exists no independent source of length
information.
Ensure that these assumptions are also valid for ACPI tables read from
sysfs.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The statx() system call has a clean header file and a consistent
layout, but was unfortunately added only in kernel 4.11.
Using stat() or fstat() directly is extremely messy since glibc does
not necessarily use the kernel native data structures. However, as
the only current use case is to obtain the length of an open file, we
can merely provide a wrapper that does precisely this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a driver using libslirp to provide a virtual network interface
without requiring root permissions on the host. This simplifies the
process of running iPXE as a Linux userspace application with network
access. For example:
make bin-x86_64-linux/slirp.linux
./bin-x86_64-linux/slirp.linux --net slirp
libslirp will provide a built-in emulated DHCP server and NAT router.
Settings such as the boot filename may be controlled via command-line
options. For example:
./bin-x86_64-linux/slirp.linux \
--net slirp,filename=http://192.168.0.1/boot.ipxe
Signed-off-by: Michael Brown <mcb30@ipxe.org>
