Allow for the existence of platforms with no PCI bus by including the
PCI settings mechanism only if PCI bus support is included.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow scripts to read basic information from USB device descriptors
via the settings mechanism. For example:
echo USB vendor ID: ${usb/${busloc}.8.2}
echo USB device ID: ${usb/${busloc}.10.2}
echo USB manufacturer name: ${usb/${busloc}.14.0}
The general syntax is
usb/<bus:dev>.<offset>.<length>
where bus:dev is the USB bus:device address (as obtained via the
"usbscan" command, or from e.g. ${net0/busloc} for a USB network
device), and <offset> and <length> select the required portion of the
USB device descriptor.
Following the usage of SMBIOS settings tags, a <length> of zero may be
used to indicate that the byte at <offset> contains a USB string
descriptor index, and an <offset> of zero may be used to indicate that
the <length> contains a literal USB string descriptor index.
Since the byte at offset zero can never contain a string index, and a
literal string index can never be zero, the combination of both
<length> and <offset> being zero may be used to indicate that the
entire device descriptor is to be read as a raw hex dump.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Implement a "usbscan" command as a direct analogy of the existing
"pciscan" command, allowing scripts to iterate over all detected USB
devices.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The UEFI device model requires us to not probe the PCI bus directly,
but instead to wait to be offered the opportunity to drive devices via
our driver service binding handle.
We currently inhibit PCI bus probing by having pci_discover() return
an empty range when using the EFI PCI I/O API. This has the unwanted
side effect that scanning the bus manually using the "pciscan" command
will also fail to discover any devices.
Separate out the concept of being allowed to probe PCI buses from the
mechanism for discovering PCI bus:dev.fn address ranges, so that this
limitation may be removed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some machines (observed with an AWS EC2 m7a.large instance) will place
the ECAM configuration space window above 4GB, thereby making it
unreachable from non-paged 32-bit code. This problem is currently
ignored by iPXE, since the address is silently truncated in the call
to ioremap(). (Note that other uses of ioremap() are not affected
since the PCI core will already have checked for unreachable 64-bit
BARs when retrieving the physical address to be mapped.)
Fix by adding an explicit check that the region to be mapped starts
within the reachable memory address space. (Assume that no machines
will be sufficiently peverse to provide a region that straddles the
4GB boundary.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When an error occurs during ECAM configuration space mapping, preserve
the error within the existing cached mapping (instead of invalidating
the cached mapping) in order to avoid flooding the debug log with
repeated identical mapping errors.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The base address provided in the PCI ECAM allocation within the ACPI
MCFG table is the base address for the segment as a whole, not for the
starting bus within that allocation. On machines that provide ECAM
allocations with a non-zero starting bus number (observed with an AWS
EC2 m7a.large instance), this will result in iPXE accessing the wrong
memory addresses within the ECAM region.
Fix by adding the appropriate starting bus offset to the base address.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The PCIe specification requires that "processor and host bridge
implementations must ensure that a method exists for the software to
determine when the write using the ECAM is completed by the completer"
but does not specify any particular method to be used. Some platforms
might treat writes to the ECAM region as non-posted, others might
require reading back from a dedicated (and implementation-specific)
completion register to determine when the configuration space write
has completed.
Since PCI configuration space writes will never be used for any
performance-critical datapath operations (on any sane hardware), a
simple and platform-independent solution is to always read back from
the written register in order to guarantee that the write must have
completed. This is safe to do, since the PCIe specification defines a
limited set of configuration register types, none of which have read
side effects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The current implementation of vpm_ioread32() erroneously reads only 16
bits of data, which fails when used with the (stricter) virtio device
emulation in VirtualBox.
Fix by using the correct readl()/inl() I/O wrappers.
Reworded-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
EISA expansion slot I/O port addresses overlap space that may be
assigned to PCI devices, which can lead to register reads and writes
with unwanted side effects during EISA probing.
Reduce the chances of performing EISA probing on PCI devices by
probing EISA slot vendor and product ID registers only if the EISA
system board vendor ID register indicates that the motherboard
supports EISA.
Debugged-by: Václav Ovsík <vaclav.ovsik@gmail.com>
Tested-by: Václav Ovsík <vaclav.ovsik@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "bridge" driver introduced in 3aa6b79 ("[pci] Add minimal PCI
bridge driver") is required only for BIOS builds using the ENA driver,
where experimentation shows that we cannot rely on the BIOS to fully
assign MMIO addresses.
Since the driver is a valid PCI driver, it will end up binding to all
PCI bridge devices even on a UEFI platform, where the firmware is
likely to have completed MMIO address assignment correctly. This has
no impact on most systems since there is generally no UEFI driver for
PCI bridges: the enumeration of the whole PCI bus is handled by the
PciBusDxe driver bound to the root bridge.
Experimentation shows that at least one laptop will freeze at the
point that iPXE attempts to bind to the bridge device. No deeper
investigation has been carried out to find the root cause.
Fix by causing efipci_supported() to return an error unless the
configuration space header type indicates a non-bridge device.
Reported-by: Marcel Petersen <mp@sbe.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The behaviour of PCI devices across a function-level reset seems to be
inconsistent in practice: some devices will preserve PCI BARs, some
will not.
Fix the behaviour of FLR on devices that do not preserve PCI BARs by
backing up and restoring PCI configuration space across the reset.
Preserve only the standard portion of the configuration space, since
there may be registers with unexpected side effects in the remaining
non-standardised space.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a minimal driver for PCI bridges that can be used to locate the
bridge to which a PCI device is attached.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Pretty much all physical machines and off-the-shelf virtual machines
will provide a functional PCI BIOS. We therefore default to using
only the PCI BIOS, with no fallback to an alternative mechanism if the
PCI BIOS fails.
AWS EC2 provides the opportunity to experience some exceptions to this
rule. For example, the t3a.nano instances in eu-west-1 have no
functional PCI BIOS at all. As of commit 83516ba ("[cloud] Use
PCIAPI_DIRECT for cloud images") we therefore use direct Type 1
configuration space accesses in the images built and published for use
in the cloud.
Recent experience has discovered yet more variation in AWS EC2
instances. For example, some of the metal instance types have
multiple PCI host bridges and the direct Type 1 accesses therefore
see only a subset of the PCI devices.
Attempt to accommodate future such variations by making the PCI I/O
API selectable at runtime and choosing ECAM (if available), falling
back to the PCI BIOS (if available), then finally falling back to
direct Type 1 accesses.
This is implemented as a dedicated PCIAPI_CLOUD API, rather than by
having the PCI core select a suitable API at runtime (as was done for
timers in commit 302f1ee ("[time] Allow timer to be selected at
runtime"). The common case will remain that only the PCI BIOS API is
required, and we would prefer to retain the optimisations that come
from inlining the configuration space accesses in this common case.
Cloud images are (at present) disk images rather than ROM images, and
so the increased code size required for this design approach in the
PCIAPI_CLOUD case is acceptable.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The ACPI MCFG table describes a direct mapping of PCI configuration
space into MMIO space. This mapping allows access to extended
configuration space (up to 4096 bytes) and also provides for the
existence of multiple host bridges.
Add support for the ECAM mechanism described by the ACPI MCFG table,
as a selectable PCI I/O API alongside the existing PCI BIOS and Type 1
mechanisms.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow pci_find_next() to discover devices beyond the first PCI
segment, by generalising pci_num_bus() (which implicitly assumes that
there is only a single PCI segment) with pci_discover() (which has the
ability to return an arbitrary contiguous chunk of PCI bus:dev.fn
address space).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The semantics of the bus:dev.fn parameter passed to pci_find_next()
are "find the first existent PCI device at this address or higher",
with the caller expected to increment the address between finding
devices. This does not allow the parameter to distinguish between the
two cases "start from address zero" and "wrapped after incrementing
maximal possible address", which could therefore lead to an infinite
loop in the degenerate case that a device with address ffff:ff:1f.7
really exists.
Fix by checking for wraparound in the caller (which is already
responsible for performing the increment).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Separate the return status code from the returned PCI bus:dev.fn
address, in order to allow pci_find_next() to be used to find devices
with a non-zero PCI segment number.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
As per the general pattern for initialisation functions in iPXE,
pci_init() saves code size by assuming that the caller has already
zeroed the underlying storage (e.g. as part of zeroing a larger
containing structure). There are several places within the code where
pci_init() is deliberately used to initialise a transient struct
pci_device without zeroing the entire structure, because the calling
code knows that only the PCI bus:dev.fn address is required to be
initialised (e.g. when reading from PCI configuration space).
Ensure that using pci_init() followed by pci_read_config() will fully
initialise the struct pci_device even if the caller did not previously
zero the underlying storage, since Coverity reports that there are
several places in the code that rely upon this.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is no method for obtaining the number of PCI buses when using
PCIAPI_DIRECT, and we therefore currently scan all possible bus
numbers. This can cause a several-second startup delay in some
virtualised environments, since PCI configuration space access will
necessarily require the involvement of the hypervisor.
Ameliorate this situation by defaulting to scanning only a single bus,
and expanding the number of PCI buses to accommodate any subordinate
buses that are detected during enumeration.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some versions of gcc (observed with gcc 9.3.0 on NixOS Linux) produce
a spurious warning about an out-of-bounds array access for the
isa_extra_probe_addrs[] array.
Work around this compiler bug by redefining the array index as a
signed long, which seems to somehow avoid this spurious warning.
Debugged-by: Manuel Mendez <mmendez534@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 87e39a9c9 ("[efi] Split efi_usb_path() out to a separate
function") unintentionally introduced an undefined symbol reference
from efi_path.o to usb_depth(), causing the USB subsystem to become a
dependency of all EFI builds.
Fix by converting usb_depth() to a static inline function.
Reported-by: Pico Mitchell <pico@randomapplications.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For USB mass storage devices, we do not want to submit more bulk IN
packets than are required for the inbound data, since this will waste
memory.
Allow an upper limit to be specified on each refill attempt. The
endpoint will be refilled to the lower of this limit or the limit
specified by usb_refill_init().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Closing and reopening a USB endpoint will clear any halt status
recorded by the host controller, but may leave the endpoint halted at
the device. This will cause the first packet submitted to the
reopened endpoint to be lost, before the automatic stall recovery
mechanism detects the halt and resets the endpoint.
This is relatively harmless for USB network or HID devices, since the
wire protocols will recover gracefully from dropped packets. Some
protocols (e.g. for USB mass storage devices) assume zero packet loss
and so would be adversely affected.
Fix by allowing any device endpoint halt status to be cleared on a
freshly opened endpoint.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The current error handling mechanism defers the endpoint reset until
the next use of the endpoint, on the basis that errors are detected
during completions and completion handling should not recursively call
usb_poll().
In the case of usb_control(), we are already at the level that calls
usb_poll() and can therefore safely perform the endpoint reset
immediately. This has no impact on functionality, but does make
debugging traces easier to read since the reset will appear
immediately after the causative error.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A failure in device registration (e.g. due to a device with malformed
descriptors) will currently result in the port being disabled as part
of the error path. This in turn causes the hardware to detect the
device as newly connected, leading to an endless loop of failed device
registrations.
Fix by leaving the port enabled in the case of a registration failure.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Resetting the host endpoint may immediately restart any pending
transfers for that endpoint. If the device endpoint halt has not yet
been cleared, then this will probably result in a second failed
transfer.
This second failure may be detected within usb_endpoint_reset() while
waiting for usb_clear_feature() to complete. The endpoint will
subsequently be removed from the list of halted endpoints, causing the
second failure to be effectively ignored and leaving the host endpoint
in a permanently halted state.
Fix by deferring the host endpoint reset until after the device
endpoint is ready to accept new transfers.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The Intel 40 Gigabit Ethernet virtual functions support only MSI-X
interrupts, and will write back completed interrupt descriptors only
when the device attempts to raise an interrupt (or when a complete
cacheline of receive descriptors has been completed).
We cannot actually use MSI-X interrupts within iPXE, since we never
have ownership of the APIC. However, an MSI-X interrupt is
fundamentally just a DMA write of a single dword to an arbitrary
address. We can therefore configure the device to "raise" an
interrupt by writing a meaningless value to an otherwise unused memory
location: this is sufficient to trigger the receive descriptor
writeback logic.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We currently use a zero language ID to retrieve strings such as the
ECM/NCM MAC address. This works on most hardware devices, but is
known to fail on some software emulated CDC-NCM devices.
Fix by using the first supported language ID, falling back to English
(0x0409) if any error occurs when fetching the list of supported
languages. This matches the behaviour of the Linux kernel.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Virtio 0.9 implementation was limited to the maximum virtqueue size of
MAX_QUEUE_NUM and the virtio-net driver would fail to initialize on hosts
exceeding this limit.
This commit lifts the restriction by allocating the queue memory based on
the actual queue size instead of using a fixed maximum. Note that virtio
1.0 still uses the MAX_QUEUE_NUM constant to cap the size (unfortunately
this functionality is not available in virtio 0.9).
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This commit introduces virtnet_free_virtqueues called on all virtqueue
error and shutdown paths. vpm_find_vqs no longer cleans up after itself
and instead expects virtnet_free_virtqueues to be always called to undo
its effect.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
vpm_find_vqs incorrectly accepted the host provided queue size with no
regard to iPXE's internal limitations. Virtio 1.0 makes it possible for
the driver to override the queue size to reduce memory requirements and
iPXE is a great use case for this feature.
Also removing the extra vq->vring.num assignment which is already
handled in vring_init.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE debug logging doesn't support %u. This commit replaces it with
%d in virtio-pci debug format strings.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Extend the 16-bit PCI bus:dev.fn address to a 32-bit seg:bus:dev.fn
address, assuming a segment value of zero in contexts where multiple
segments are unsupported by the underlying data structures (e.g. in
the iBFT or BOFM tables).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This commit adds support for driving virtio 1.0 PCI devices. In
addition to various helpers, a number of vpm_ functions are introduced
to be used instead of their legacy vp_ counterparts when accessing
virtio 1.0 (aka modern) devices.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
PCI devices may support more capabilities of the same type (for
example PCI_CAP_ID_VNDR) and there was no way to discover all of them.
This commit adds a new API pci_find_next_capability which provides
this functionality. It would typically be used like so:
for (pos = pci_find_capability(pci, PCI_CAP_ID_VNDR);
pos > 0;
pos = pci_find_next_capability(pci, pos, PCI_CAP_ID_VNDR)) {
...
}
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Record the speed of a USB device based on the port's speed at the time
that the device was enabled. This allows us to remember the device's
speed even after the device has been disconnected (and so the port's
current speed has changed).
In particular, this allows us to correctly identify the transaction
translator for a low-speed or full-speed device after the device has
been disconnected.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The usb_message() and usb_stream() functions currently check for
port->speed==USB_SPEED_NONE to determine whether or not a device has
been unplugged. This test will give a false negative result if a new
device has been plugged in before the hotplug mechanism has finished
handling the removal of the old device.
Fix by checking instead the port->disconnected flag, which is now
cleared only after completing the removal of the old device.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
