The special key range (from KEY_MIN upwards) currently overlaps with
the valid range for Unicode characters, and therefore prohibits the
use of Unicode key values outside the ASCII range.
Create space for Unicode key values by moving the special keys to the
range immediately above the maximum valid Unicode character. This
allows the existing encoding of special keys as an efficiently packed
representation of the equivalent ANSI escape sequence to be maintained
almost as-is.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Several keyboard layouts define ASCII characters as accessible only
via the AltGr modifier. Add support for this modifier to ensure that
all ASCII characters are accessible.
Experiments suggest that the BIOS console is likely to fail to
generate ASCII characters when the AltGr key is pressed. Work around
this limitation by accepting LShift+RShift (which will definitely
produce an ASCII character) as a synonym for AltGr.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Handle Ctrl and CapsLock key modifiers within key_remap(), to provide
consistent behaviour across different console types.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The key with scancode 86 appears in the position between left shift
and Z on a US keyboard, where it typically fails to exist entirely.
Most US keyboard maps define this nonexistent key as generating "\|",
with the notable exception of "loadkeys" which instead reports it as
generating "<>". Both of these mapping choices duplicate keys that
exist elsewhere in the map, which causes problems for our ASCII-based
remapping mechanism.
Work around these quirks by treating the key as generating "\|" with
the high bit set, and making it subject to remapping. Where the BIOS
generates "\|" as expected, this allows us to remap to the correct
ASCII value.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some keyboard layouts (e.g. "fr") swap letter and punctuation keys.
Apply the logic for upper and lower case and for Ctrl-<key> only after
applying remapping, in order to handle these layouts correctly.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Make the class ID a property of the USB driver (rather than a property
of the USB device ID), and allow USB drivers to specify a wildcard ID
for any of the three component IDs (class, subclass, or protocol).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Generate a score for each possible USB device configuration based on
the available driver support, and select the configuration with the
highest score. This will allow us to prefer ECM over RNDIS (for
devices which support both) and will allow us to meaningfully select a
configuration even when we have drivers available for all functions
(e.g. when exposing unused functions via EFI_USB_IO_PROTOCOL).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When USB network card drivers are used, the BIOS' legacy USB
capability is necessarily disabled since there is no way to share the
host controller between the BIOS and iPXE. This currently results in
USB keyboards becoming non-functional in USB-enabled builds of iPXE.
Fix by adding basic support for USB keyboards, enabled by default in
iPXE builds which include USB support.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
