mirror of
https://github.com/ipxe/ipxe
synced 2025-12-24 06:22:59 +03:00
[ethernet] Update mii.h and use it in drivers that had a private copy
Signed-off-by: Michael Brown <mcb30@etherboot.org>
This commit is contained in:
committed by
Michael Brown
parent
005fce0258
commit
b8469eddaa
@@ -32,6 +32,7 @@ FILE_LICENCE ( GPL2_OR_LATER );
|
||||
/* to get the PCI support functions, if this is a PCI NIC */
|
||||
#include <gpxe/pci.h>
|
||||
#include <gpxe/ethernet.h>
|
||||
#include <mii.h>
|
||||
|
||||
/* Condensed operations for readability. */
|
||||
#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
|
||||
@@ -61,71 +62,6 @@ FILE_LICENCE ( GPL2_OR_LATER );
|
||||
*/
|
||||
#define PKT_BUF_SZ 1536
|
||||
|
||||
/* Generic MII registers. */
|
||||
|
||||
#define MII_BMCR 0x00 /* Basic mode control register */
|
||||
#define MII_BMSR 0x01 /* Basic mode status register */
|
||||
#define MII_PHYSID1 0x02 /* PHYS ID 1 */
|
||||
#define MII_PHYSID2 0x03 /* PHYS ID 2 */
|
||||
#define MII_ADVERTISE 0x04 /* Advertisement control reg */
|
||||
#define MII_LPA 0x05 /* Link partner ability reg */
|
||||
#define MII_EXPANSION 0x06 /* Expansion register */
|
||||
#define MII_DCOUNTER 0x12 /* Disconnect counter */
|
||||
#define MII_FCSCOUNTER 0x13 /* False carrier counter */
|
||||
#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */
|
||||
#define MII_RERRCOUNTER 0x15 /* Receive error counter */
|
||||
#define MII_SREVISION 0x16 /* Silicon revision */
|
||||
#define MII_RESV1 0x17 /* Reserved... */
|
||||
#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */
|
||||
#define MII_PHYADDR 0x19 /* PHY address */
|
||||
#define MII_RESV2 0x1a /* Reserved... */
|
||||
#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */
|
||||
#define MII_NCONFIG 0x1c /* Network interface config */
|
||||
|
||||
/* Basic mode control register. */
|
||||
#define BMCR_RESV 0x007f /* Unused... */
|
||||
#define BMCR_CTST 0x0080 /* Collision test */
|
||||
#define BMCR_FULLDPLX 0x0100 /* Full duplex */
|
||||
#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */
|
||||
#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */
|
||||
#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */
|
||||
#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */
|
||||
#define BMCR_SPEED100 0x2000 /* Select 100Mbps */
|
||||
#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */
|
||||
#define BMCR_RESET 0x8000 /* Reset the DP83840 */
|
||||
|
||||
/* Basic mode status register. */
|
||||
#define BMSR_ERCAP 0x0001 /* Ext-reg capability */
|
||||
#define BMSR_JCD 0x0002 /* Jabber detected */
|
||||
#define BMSR_LSTATUS 0x0004 /* Link status */
|
||||
#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */
|
||||
#define BMSR_RFAULT 0x0010 /* Remote fault detected */
|
||||
#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */
|
||||
#define BMSR_RESV 0x07c0 /* Unused... */
|
||||
#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
|
||||
#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
|
||||
#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
|
||||
#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
|
||||
#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */
|
||||
|
||||
/* Advertisement control register. */
|
||||
#define ADVERTISE_SLCT 0x001f /* Selector bits */
|
||||
#define ADVERTISE_CSMA 0x0001 /* Only selector supported */
|
||||
#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
|
||||
#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
|
||||
#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
|
||||
#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
|
||||
#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */
|
||||
#define ADVERTISE_RESV 0x1c00 /* Unused... */
|
||||
#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */
|
||||
#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */
|
||||
#define ADVERTISE_NPAGE 0x8000 /* Next page bit */
|
||||
|
||||
#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
|
||||
ADVERTISE_CSMA)
|
||||
#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
|
||||
ADVERTISE_100HALF | ADVERTISE_100FULL)
|
||||
|
||||
/* for different PHY */
|
||||
enum phy_type_flags {
|
||||
MysonPHY = 1,
|
||||
|
||||
Reference in New Issue
Block a user