diff --git a/docs/Makefile b/docs/Makefile
new file mode 100644
index 0000000..d0c3cbf
--- /dev/null
+++ b/docs/Makefile
@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line, and also
+# from the environment for the first two.
+SPHINXOPTS    ?=
+SPHINXBUILD   ?= sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
diff --git a/docs/make.bat b/docs/make.bat
new file mode 100644
index 0000000..6fcf05b
--- /dev/null
+++ b/docs/make.bat
@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.https://www.sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%
+
+:end
+popd
diff --git a/docs/source/conf.py b/docs/source/conf.py
new file mode 100644
index 0000000..b359717
--- /dev/null
+++ b/docs/source/conf.py
@@ -0,0 +1,59 @@
+# Configuration file for the Sphinx documentation builder.
+#
+# This file only contains a selection of the most common options. For a full
+# list see the documentation:
+# https://www.sphinx-doc.org/en/master/usage/configuration.html
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
+
+
+# -- Project information -----------------------------------------------------
+
+project = 'JSON-RPC'
+copyright = '2022, RemiZOffAlex'
+author = 'RemiZOffAlex'
+
+
+# -- General configuration ---------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = 'ru'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path.
+exclude_patterns = []
+
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+html_theme = 'alabaster'
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
\ No newline at end of file
diff --git a/docs/source/description.rst b/docs/source/description.rst
new file mode 100644
index 0000000..9e73cb2
--- /dev/null
+++ b/docs/source/description.rst
@@ -0,0 +1,2 @@
+Описание
+========
diff --git a/docs/source/index.rst b/docs/source/index.rst
new file mode 100644
index 0000000..d5eb8dd
--- /dev/null
+++ b/docs/source/index.rst
@@ -0,0 +1,24 @@
+.. _index:
+
+.. JSON-RPC documentation master file, created by
+   sphinx-quickstart on Fri Feb 18 23:17:10 2022.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Welcome to JSON-RPC's documentation!
+====================================
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Contents:
+
+   description
+   install
+   usage
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
diff --git a/docs/source/install.rst b/docs/source/install.rst
new file mode 100644
index 0000000..cd735f9
--- /dev/null
+++ b/docs/source/install.rst
@@ -0,0 +1,17 @@
+Установка
+=========
+
+Сборка
+------
+
+.. code-block:: bash
+
+   ./setup.py sdist
+
+Установка
+---------
+
+
+.. code-block:: bash
+
+   pip install -e .
diff --git a/docs/source/usage.rst b/docs/source/usage.rst
new file mode 100644
index 0000000..7e75216
--- /dev/null
+++ b/docs/source/usage.rst
@@ -0,0 +1,24 @@
+Использование
+=============
+
+.. code-block:: python
+
+   from jsonrpc import JSONRPC
+
+
+   jsonrpc = JSONRPC()
+
+   @jsonrpc.method('app.endpoint')
+   def app_endpoint(a: int, b: int) -> int:
+       result = a + b
+       return result
+
+   request = {
+       "jsonrpc": "2.0",
+       "method": "app.endpoint",
+       "params": {"a": 1, "b": 2},
+       "id": "1"
+   }
+   response = jsonrpc(request)
+
+   print(response)